Perpustakaan Fakultas Teknik

Universitas Mataram

  • Beranda
  • Informasi
  • Berita
  • Bantuan
  • Pustakawan
  • Area Anggota
  • Pilih Bahasa :
    Bahasa Arab Bahasa Bengal Bahasa Brazil Portugis Bahasa Inggris Bahasa Spanyol Bahasa Jerman Bahasa Indonesia Bahasa Jepang Bahasa Melayu Bahasa Persia Bahasa Rusia Bahasa Thailand Bahasa Turki Bahasa Urdu

Pencarian berdasarkan :

SEMUA Pengarang Subjek ISBN/ISSN Pencarian Spesifik

Pencarian terakhir:

{{tmpObj[k].text}}
No image available for this title

Tugas Akhir Mesin

PENGARUH VARIASI TEMPERATUR UDARA DAN MASSA BAHAN TERHADAP LAJU PENGERINGAN GABAH MENGGUNAKAN ALAT PENGERING TIPE VERTIKAL KONTINYU

Sahnun - Nama Orang;

Indonesia is an agrarian country rich in agricultural produce
because some of its inhabitants have farmers' livelihoods. One
of the agricultural products that often suffers damage in
agricultural products during post-harvest is grain. Mechanical
drying is needed to solve the problem because drying can be
done without depending on the weather and more efficiently.
The purpose of this study is to determine the effect of air
temperature and material mass on drying rate and drying time
and drying efficiency. The temperature variations used are
45°C, 50°C, and 55°C with a tolerance of ± 1°C and the mass
variations of the materials used are 30 kg, 40 kg and 50 kg. The
results of this study partly show that the higher the air
temperature used the faster the drying rate and drying time.
While the heavier the mass of dried materials, the longer the
drying time. At 55°C and material mass of 50 kg resulting in the
fastest drying rate is 0.00029328 kg/s. While the fastest drying
time is 135 minutes 24 seconds at 55°C and the material mass is
30 kg to reach a water content of 14%. At 45°C and material
mass of 50 kg resulting in the slowest drying rate of 0.0001634
kg/s and being a variation that takes the most drying time of 270
minutes 28 seconds to reach water content of 14%, with a
constant air speed of 7 m/s. The highest drying efficiency occurs
at a temperature variation of 55°C with a material mass of 30
kg which is 2.17%. And the lowest at 450C with a material mass
of 50 kg is 2.12%.


Ketersediaan

Tidak ada salinan data

Informasi Detail
Judul Seri
-
No. Panggil
631.35.Sah.p
Penerbit
Universitas Mataram : Fakultas Teknik Unram., 2020
Deskripsi Fisik
xix,55 Hlm: Illus: 21x29 cm
Bahasa
Indonesia
ISBN/ISSN
-
Klasifikasi
631.35
Tipe Isi
other
Tipe Media
computer
Tipe Pembawa
audio disc
Edisi
Edisi 1 Jilid 1
Subjek
PENGERINGAN GABAH MENGGUNAKAN ALAT PENGERING TIPE
Grain Drying Continuous Vertical type dryer Temper
Info Detail Spesifik
PENGARUH VARIASI TEMPERATUR UDARA DAN MASSA BAHAN TERHADAP LAJU PENGERINGAN GABAH MENGGUNAKAN ALAT PENGERING TIPE VERTIKAL KONTINYU
Pernyataan Tanggungjawab
Sahnun
Versi lain/terkait

Tidak tersedia versi lain

Lampiran Berkas
  • PENGARUH VARIASI TEMPERATUR UDARA DAN MASSA BAHAN TERHADAP LAJU PENGERINGAN GABAH MENGGUNAKAN ALAT PENGERING TIPE VERTIKAL KONTINYU
Komentar

Anda harus login sebelum memberikan komentar

Perpustakaan Fakultas Teknik
  • Informasi
  • Layanan
  • Pustakawan
  • Area Anggota

Tentang Kami

Ruang Baca Fakultas Teknik

Kami menyedian Buku ajar ilmu teknik dan Tugas Akhir mahaiswa Fakultas Teknik Universitas Mataram

Cari

masukkan satu atau lebih kata kunci dari judul, pengarang, atau subjek

Donasi untuk SLiMS Kontribusi untuk SLiMS?

© 2025 — Senayan Developer Community

Ditenagai oleh SLiMS
Pilih subjek yang menarik bagi Anda
  • Karya Umum
  • Filsafat
  • Agama
  • Ilmu-ilmu Sosial
  • Bahasa
  • Ilmu-ilmu Murni
  • Ilmu-ilmu Terapan
  • Kesenian, Hiburan, dan Olahraga
  • Kesusastraan
  • Geografi dan Sejarah
Icons made by Freepik from www.flaticon.com
Pencarian Spesifik